S7602

Core Switch

S7602

S7602

High-end Multiservice Routing Switches
> Using the Intelligent Resilient Framework 2 (IRF2) as the system foundation of the virtualization software system
> Supporting technologies required by cloud data centers, for example, TRILL, EVB, and FCoE
> Fully compatible with 40GE and 100GE Ethernet standards
> Integrating multiple network services such as IPv6, network security, wireless control, and passive optical networks
> Providing multiple high availability technologies such as non-stop forwarding, non-stop upgrade, graceful restart, and ring network protection. This improves production efficiency of users and ensures a maximum normal operation time of the network, thereby lowering the total costs of ownership (TCOs) for customers


Technical Specification

Model

DH-S7602

Switching capacity

5.12 Tbit/s or 12.8 Tbit/s

IPv4 packet forwarding rate

960 Mpps/2400 Mpps

Number of slots

4

Number of service slots

2

Redundancy design

Redundancy of power sources and main control boards

Layer-two features

Supports the following Layer-two features:

●IEEE 802.1P (CoS priority)

●IEEE 802.1Q (VLAN)

●802.1d (STP)/802.1w (RSTP)/802.1s (MSTP)

●IEEE 802.1ad (QinQ), flexible QinQ, and VLAN mapping

●IEEE 802.3x (full duplex flow control) and backpressure flow control (half duplex)

●IEEE 802.3ad (link aggregation) and cross-board link aggregation

●IEEE 802.3 (10Base-T)/802.3u (100Base-T)

●IEEE 802.3z (1000BASE-X)/802.3ab (1000BaseT)

●IEEE 802.3ae (10Gbase)

●RRPP

●Cross-board port/flow mirroring

●Suppression of port broadcast/multicast/unknown unicast storms

●Jumbo frames

●VLAN division based on ports, protocols, subnets, and MAC addresses

●SuperVLANs

●PVLANs

●Multicast VLAN+

●Point-to-point single-VLAN cross connection and dual-VLAN cross connection

●Forwarding dependent on VLAN IDs only, without MAC address learning

●Maximum VLAN mapping/Full support of VLAN mapping by flexible QinQ entries

●GVRP

●LLDP

IPv4 routing

Supports the following IPv4 routing features:

●ARP Proxy

●DHCP Relay

●DHCP Server

●Static routing

●RIPv1/v2

●OSPFv2

●IS-IS

●BGPv4

●OSPF/IS-IS/BGP GR (Graceful Restart)

●Equivalent routing

●Policy-based routing

●Routing policies

IPv6 routing

Supports the following IPv6 routing features:

●ICMPv6

●ICMPv6 redirection

●DHCPv6

●ACLv6

●OSPFv3

●RIPng

●BGP4+

●IS-ISv6

●ISATAP

●6to4 tunnels

●IPv6/IPv4 dual-protocol stack

Multicast

Supports the following multicast routing features:

●IGMPv1/v2/v3

●IGMPv1/v2/v3 Snooping

●IGMP Filter

●IGMP fast leave

●PIM-SM/PIM-DM/PIM-SSM

●MSDP

●AnyCast-RP

●MLDv2/MLDv2 Snooping

●PIM-SMv6, PIM-DMv6, and PIM-SSMv6

ACL/QoS

Supports the following ACL/QoS features:

●Standard and extended ACLs

●VLAN-based ACLs

●Ingress and egress ACLs

●Ingress and Egress CARs (with granularities reaching 8 Kbit/s)

●Two-level metering capability

●VLAN-based aggregated CAR, and MAC address–based CAR

●Traffic shaping

●802.1P/DSCP priority marking and remarking

●Hierarchical QoS (H-QoS)

●Three-level queue scheduling

●Queue scheduling mechanisms (SP, WRR, SP+WRR, and CBWFQ)

●Congestion avoidance mechanisms (including Tail-Drop and WRED)

●Mirroring

Security mechanism

Supports the following system management features:

●FTP, TFTP, and Xmodem

●SNMP v1/v2/v3

●sFlow traffic statistics

●RMON

●NTP clock

●NetStream traffic statistics function

●Smart power source management

●802.3az efficient energy-saving Ethernet

●Device online status monitoring mechanism, detecting key components such as main control engines, backplanes, chips, and storage components

Reliability

Supports the following reliability features:

●1+1 redundant backup of main control boards

●1+1 redundant backup of power sources

●Passive backup design

●Hot swap of all boards

●CPU protection

●VRRP

●Ethernet OAM (802.1ag)

●MAC Tracert

●RPR

●RRPP and ERPS

●Graceful Restart for OSPF/BGP/IS-IS

●DLDP

●VCT

●Smart-Link

●Hot patches

Environment requirements

●Temperature range: 0ºC (32°F)–45ºC (113°F)

●Relative humidity: 10%–95% (non condensing)

Security standards and EMC certification

Passed CE, FCC PART 15, TUV-GS, UL-CUL, ICES003, and VCCI certification

Power source

DC:–48 V to–60V

AC: 100 V to 290 V

Dimensions (Width x Height x Depth) (mm)

436 x 175 x 420

Weight (full configuration)

≤ 27 kg

Class Date Title Language Type Download
Datasheet 2017-09-26 DH-S7602_Datasheet_20170926 English PDF pdf
Class Date Title Language Type Download
Class Date Title Language Type Download
Class Date Title Language Type Download
Class Date Title Download
Images 2017-10-17 S7602